1 Product Overview
The filter is mainly used to remove ferromagnetic impurities in the liquid slurry.
Widely used in chemical, pharmaceutical, pigments, dyes, food, metallurgy, ceramics and other industries.
This product has the advantages of strong magnetic force, good iron removal effect, and convenient cleaning of iron filings.
In the process of liquid slurry conveying, when the slurry passes through the filter, the iron impurities in the slurry are adsorbed on the magnetic rod sleeve by the magnetic effect of the strong magnetic bar, and the iron impurities in the slurry are completely removed to ensure that the iron impurity content can be effectively controlled in the next process.
The interface flange of the magnetic filter is connected to the slurry output pipeline, so that the slurry flows uniformly through the filter, and the cleaning period is determined after a period of trial.
3 Product Introduction
Magnetic filter is a strong magnetic rod as the filter element, used to filter the iron impurities in the material, the use of magnets to absorb the characteristics of iron products, in the effective range to achieve the effect of iron removal equipment.
There are three main magnetic sources for strong magnetic bars:
1, ferrite magnet, hard and brittle, low magnetic energy, but it is not easy to demagnetize is not easy to corrosion, the production process is simple and cheap, is widely used in industrial production.
2, Ndfeb magnet, with high remanence, high coercivity and high magnetic field strength and other characteristics, in oxygen free high temperature and other extreme environment can also maintain long-term magnetic, with good thermal stability, chemical stability and high corrosion resistance, in the field of strong magnetic field has a wide range of application prospects.
3, samarium cobalt magnet, one of the rare earth permanent magnets, magnetic energy product, coercivity reliable, high temperature resistance. It is the second generation of Ndfeb magnetic steel products, performance is more excellent.
Magnetic filter is mainly used to remove the ferromagnetic impurities in the stock liquid, to ensure the subsequent production process, in which the double filter barrel magnetic filter has two reversing valves, when the impurities on the filter device reach the critical value of cleaning will change the reversing valve position, at the same time, another group can continue to run to ensure the continuity of the filtration process.
The magnetic filter is composed of a strong magnetic material with high coercivity and a blocking filter. The adsorption force of the strong magnetic bar used in the magnetic filter is ten times that of the general magnetic material, and it has the ability to adsorb the micron level ferromagnetic impurities under the instantaneous impact of raw water or high flow rate.
4 Installation and use
The interface flange of the magnetic filter is connected to the slurry output pipe, and the pipe is connected in the direction indicated by the arrow on the filter body. The raw water flows evenly through the filter, and the cleaning cycle can be determined after a period of use.
5 Filtering Process
Raw water enters the filter from the entrance, and is subjected to its magnetic action when it passes through the strong magnetic bar. The ferromagnetic impurities in the raw water are absorbed on the magnetic bar. After removing the ferromagnetic impurities in the raw water, the next process can be ensured in an orderly manner.
6 Advantages and application industries
The magnetic filter has the advantages of strong magnetic force, good iron removal effect, convenient cleaning, etc. It can remove fine iron impurities in the material, so as to improve the purity of the material, ensure the safety of the material, and improve the quality of the product. Widely used in food processing, fine chemicals, pharmaceuticals, pigments, dyes, food, metallurgy, ceramics and other industries.
